Publications

  • Mark P. Taylor, Greg L Johnson, Evan W Andrews, Barry J Welch: The Impact of Anode Cover Control and Anode Assembly Design on Reduction Cell Performance, Light Metals 2004 Edited by Alton T. Tabereaux TMS (The Minerals, Metals & Materials Society), 2004, P 199-211 (2004).
  • ·T. Ashida, J.B.Metson, and Margaret M Hyland: New Approaches to Phase Analysis of Smelter Grade Aluminas, Light Metals 2004 Edited by Alton T. Tabereaux TMS (The Minerals, Metals & Materials Society), 2004, P 93-96 (2004).
  • Margaret M Hyland, Edwin Patterson, Barry J Welch: Alumina Structural Hydroxyl as a Continuous Source of HF,  Light Metals 2004 Edited by Alton T. Tabereaux TMS (The Minerals, Metals & Materials Society), 2004, P 361-366 (2004).
  • S. Madshus, T. Foosæns, Margaret M. Hyland and H.A.  Øye: Hydrogen Transfer During Carbonization of Binder Pitches, Light Metals 2004 Edited by Alton T. Tabereaux TMS (The Minerals, Metals & Materials Society), 2004, P 503-508 (2004).
  • M P Taylor, Barry J Welch: The Future Outlook and Challenges for Smelting Aluminium, Aluminium International Today March/April 2004, P20-24.
  • M P Taylor: 2003 Annual Report of Light Metal Research Centre 
  • J.B. Metson, S.J.Hay, H.J.Trodahl, B.Ruck and Y. Hu  The Use Of The X-Ray Absorption Near Edge Spectrum In Materials Characterisation.   Current Applied Physics.4, (2-4), p.233-236 (2004).
  • G. I.N. Waterhouse, G.A.Bowmaker, and J.B. Metson. Mechanism and Active Site for the Partial Oxidation of Methanol to Formaldehyde over an Electrolytic Silver Catalyst.  Applied Catalysis A. 265. p. 85-101 (2004).
  • S.Verdier, N.van der Laak, S.Delalande, J.Metson and F.Dalard.  The Reactivity of a Magnesium-Aluminium Alloy in Acidic Fluoride Solutions Studied by Electrochemical Techniques and XPS.  Applied Surface Science. in press. 
  • HYLAND, M.M., HAY, S.J.1 and METSON, J.B.2 The fate of COS in aluminium smelting dry scrubbers.' 2003 Joint Conference of SCENZ/FEANZ/EMG, Massey University, Wellington, New Zealand, 10-11 July 2003.
  • HYLAND, M.M, FUJITA, J.1 and NGO, T. Surface Chemistry of Adhesion to Aluminium'2003 Joint Conference of SCENZ/FEANZ/EMG, Massey University, Wellington, New Zealand, 10-11 July 2003.
  • PATEL, P.5 and HYLAND M.M. Progress Report: Minimising wear of graphite cathodes through optimization of grain orientation and porosity, E9221, Feb 2003, 23 pages.
  • GLUCINA, M.5 and HYLAND M.M. "Quarterly Report on Inert Anodes for Aluminium Smelting, August 2003, 28 pages, E 9139.
  • S.J. Hay, J.B. Metson, M. M. Hyland.  Sulfur Speciation in Aluminium Smelting Anodes.  Industrial and Engineering Chemical Research, Accepted for Publication
  • S. J. Hay, M. M. Hyland, J. B. Metson,  E.C. Patterson, M. P. Taylor and B. J. Welch Electrochemical and Environmental Consequences of Carbon Anode Impurities in Modern Aluminium Smelting Cells.  International Symposium on Electrochemical Applications.  In press, Bulletin of Electrochemistry.
  • P.Rafeii, M.Hyland, B.James, B.Welch & F.Hiltman,  "Electrolytic Degradation within Cathode Materials" Light Metals, TMS,757-742.
  •  B.J.James,  "Cathode And Sidewall Degradation". Proceedings of the 6th Australasian Aluminium Smelting Technology Conference, 617-626.
  • 1998 B.J.James, B.J.Welch & M.Skyllas-Kazacos, eds CD-ROM Proceedings of the 6th Australasian

        Aluminium Smelting Technology Conference.  ISBN 0 7334 0512 6.

  • B.J.Welch, B.J.James & M.M.Hyland,  "Limitations of Carbon-Carbon Composites and Developments in Alternative Composites for use in Aluminium Smelting Cells".  Proceedings of the 4th International
  • Conference on Advances in Materials and Processing Technologies, 439-450 Key-note
  • B.J.James, B.J.Welch, M.M.Hyland & F.Hiltmann, "The Oxidation of Heterogeneous Carbon Electrodes and Furnace Liners.  Part II: Overall Reactivity Correlations".  Light Metals, TMS, 637-641
  • B.J.James, B.J.Welch, M.M.Hyland, J.B.Metson & C.D.Morrison,  Interfacial Processes and the Performance of Cathode Linings in Aluminium Smelters.  Journal of Metals, Vol.47, No.2, 22-25
BACK TO TOP